Elizabeth Amponsah crafted a sustainable wooden cutlery tray with thoughtful compartments, bringing Sabine's vision of practical elegance to life. What's your wish?
A request by Sabine from Voerde, Germany
Hello, I would like to have a cutlery tray with the following dimensions: 200 mm wide, 450 mm deep, 5 mm high – with four compartments. The material should be sustainable wood.
If it’s also possible with hemp, it’s very welcome.
The Journey of Creating Cutlery tray with the dimensions: 200 mm wide, 450 deep
Negotiation & Planning
Cutlery tray with the dimensions: 200 mm wide, 450 deep - design ideas and artisan proposals
Hello Sabine please kindly confirm the size of the tray in centimetres thank you. Length 45cm width 20cm and Height 5cm
29 Apr 2019 11:23 am: Sabine
Hello, Elizabeth,
this is the old plastic cutlery tray with 5 compartments. The new one can look like this. Since plastic is more flexible than wood in terms of mobility, I think that 5 mm (length and width) should be subtracted from the indicated dimensions: Length 445 mm, width 195 mm, height remains unchanged 50mm, are external dimensions. That should suffice. Many greetings
Hello Sabine. Thanks for your response. I have attached a sketch of the tray with the dimensions. Do have a look and confirm with the measurements and design. Thank you
01 May 2019 5:16 pm: Sabine
Hello, Elizabeth,
Thanks for your answer and the sketch. But it doesn't fit, the cutlery wouldn't fit in the cutlery tray. Enclosed is a sketch of me. Many greetings
Hello Sabine. I have seen your sketch with the measurements. Thank you. I understand you now. With your approval we can start work . Thank you.
08 May 2019 11:20 am: Sabine
OK, THEN. I hereby agree. How long will it take for the cutlery tray to reach me?
Good morning. It will take 72hours on my part to complete work. The shipping will depend on the freight forwarders. Thank you.
Crafting Process
How to make a Cutlery tray with the dimensions: 200 mm wide, 450 deep – work in progress
Part Payment received for commencement of project. Thank you
16 May 2019 9:47 am: Sabine
Good morning, sir,
I don't understand the part payment, I paid the complete price with the credit card.
Many greetings
Good morning. I am working on the tray. Per the measurements, if we stick strictly with your inner measurements the inner spaces will be very small. The thickness of the wood is 1.5cm. We can get the two 8cm demarcation but we will be left will about 23cm for the longer side instead of the 28cm. And also dividing the other side by 3 will make it extremely small so may advice we stick to two. I have sent attachments to explain this please. I will be on standby for feedback. Thank you.
26 May 2019 12:37 pm: Sabine
Hello, Elizabeth,
that's okay, you have my feedback. I haven't been online for a long time, so my answer is late. I'm sorry. I'm sorry. The next 2 weeks will also be tight. Best regards.
Hello. I will proceed with the appropriate demarcation then. Thank you.
Hello Sabine. Work is 90% completed.
I am left with spraying and we are good to go.
09 Jun 2019 9:46 am: Sabine
Good morning,
the way it looks right now, it's not fit for my purposes. Knife, fork and big spoon are 22 cm long: I need three compartments. These must be 24 cm long, so that the cutlery fits in with some clearance. The small spoons are only 15 cm long, so even there with some leeway a length of 17 cm is enough, one or two compartments of it. Good luck.
Sabine
So In total we need to get four compartments. One at the top for the small spoons and three at the base with the leeway to manoeuvre. Coming right up please. Thanks.
15 Jun 2019 1:27 pm: Sabine
Four compartments are sufficient. As in the measures last described by me. Many greetings
Good. I have attached a new file by your specification. Thank you.
19 Jun 2019 8:38 am: Sabine
This looks good. Thank you.
Reference: ON002223E-8156
Detailed Cost Breakdown
| Price | |
|---|---|
| Cost of material |
17.33
|
| Cost of labour |
13.86
|
| Cost of packaging |
3.47
|
| Cost of delivery to local operations manager |
6.07
|
| Subtotal – payout to artisan |
40.73
|
| Customer acquisition costs (advertising etc.) |
4.07
|
| Handling fee Urban Change Lab |
4.07
|
| Shipping costs from Ghana to Germany* |
15
|
| VAT (Germany)* |
12.14
|
| Total |
76.01
|
*Shipping costs and VAT vary depending on your location.
Each price shown is based on a unique, custom request. Final prices may vary depending on materials, effort, and delivery location.
