- Are you an artisan, craftsman, designer or artist in Kenya, Ghana, Rwanda or Nigeria?
- Would you like to realize one of the below listed customer requests as a single item?
- Would you like to get in contact with the customer to get more information?
- Do you have the knowledge and time to realize it yourself?
Just click on one of the red buttons below and provide an offer.
Customer's request: 'Good evening.
The wallets you offer have too few card slots for me and I think they are too small for my taste.
I have taken some pictures of my current wallet with measurements.
My current wallet has poor material and I am completely dissatisfied with it.
But...... the way it is equipped, it is perfect for me.
I could do without two card compartments and the two compartments where the business cards go in have to be there, but not necessarily transparent.
Everything else should be exactly the same, but in a good, thick leather in black and sewn with black thread.
Zipper for small change and press studs to close it.
Briefly.
The outer leather should be stiff.
By no means flabby.
;-))
The leather to separate the compartments can be a bit thinner and less stable.
I know my demands are high, but I am prepared to pay a little more and if you would be prepared to build me such a purse according to my ideas and I like it, I would be happy to commission a second one.
I would be pleased to receive a suitable offer from you.
With kind regards,
Michael.'
Request ID: 62630 I would like to provide an offer
Customer's request: 'Made-to-measure cutlery tray. Length: 56 cm. Width: 69 cm. Height: 7 cm. Compartment division: Individual. 15 compartments in different sizes and divisions, see drawing'
Request ID: 62578 I would like to provide an offer
Customer's request: 'I would like a purse made of ... black leather, it's supposed to be a gift. My husband has a Versace wallet that is no longer available to buy. However, he has wanted one just like it for a long time. I would therefore like to have a wallet exactly like this one. Preferably with the patches, which I would send to you, as well as photos and measurements of the old wallet.
I would be more than happy to hear from you and whether this would be possible.
Kind regards Maria'
Request ID: 62442 I would like to provide an offer
Customer's request: 'How do you do?
I need a new men's wallet:
- vertical, made of leather, to be determined
- Color dark blue or dark green or also a cool color combination, i.e. black on the outside and another color on the inside
- Dimensions: 9 cm wide, 15 cm high
- 5 vertical credit card slots on each side, i.e. symmetrical.
- 2 side pockets on the inside when open
- One large compartment for banknotes from the top
I am sending you a photo of my current wallet, which I would like to have exactly like this again, but cannot find anywhere online or elsewhere.
Many thanks and best regards,
Ulf Karow'
Request ID: 62438 I would like to provide an offer
Customer's request: 'The wallet should have a length of 24cm'
Request ID: 62222 I would like to provide an offer
Customer's request: 'Custom made cutlery tray. Length: 43 cm. Width: 33.5 cm. Height: 6 cm. Compartment setup: Standard (compartments for: forks, knifes, spoons, small spoons, small forks, serving cutlery). '
Request ID: 61779 I would like to provide an offer
Customer's request: 'Custom-made cutlery tray. Length: 47.5 cm. Width: 32 cm. Height: 7 cm. Compartment division: Individual. Dear Urban Change Lab team!
Please send us a non-binding offer according to the attached photo.
The external dimensions of 47.5x32x7 cm must be adhered to - the dimensions inside the cutlery tray can be regarded as axial dimensions.
As the drawer is narrower at the bottom, the base may only be 30 cm wide, resulting in a slope on the long sides, the ends remain straight.
Many thanks in advance!'
Request ID: 61697 I would like to provide an offer
Customer's request: 'Made-to-measure cutlery tray. Length: 46.0 cm. Width: 22.0 cm. Height: 5.0 cm. Compartment layout: Standard (compartments for forks, knives, tablespoons, teaspoons, cake forks and a large compartment for serving cutlery).'
Request ID: 61435 I would like to provide an offer
Customer's request: 'Custom made Wallet (attached photos). Possible colors: blue, red, brown - not black'
Request ID: 61151 I would like to provide an offer
Customer's request: 'We need a cover made of mahogany wood for our 80cm hob. This should be in 2 parts and not rest on the top. The hob is 52 cm deep. The elevation should also be made of wood and be non-slip with small rubber feet.
If possible, it should be possible to pull the 2 wooden parts apart and an approx. 25 cm intermediate plate should be raised, as with extendable tables. But only if this is possible.'
Request ID: 61042 I would like to provide an offer
Customer's request: 'Custom-made cutlery tray. Length: 41.7 cm. Width: 39 cm. Height: 5 cm. Compartment layout: Standard (compartments for forks, knives, tablespoons, teaspoons, cake forks and a large compartment for serving cutlery).'
Request ID: 61036 I would like to provide an offer
Customer's request: 'I would like everyone to realize how creative iam in designing.how I can comeuppance with different design and how they are super perfect.give me anything I will bring it out perfectly'
Request ID: 61006 I would like to provide an offer
Customer's request: 'Made-to-measure cutlery tray. Length: 82.8 cm. Width: 38.2 cm. Height: 7.5 cm. Compartment division: Individual. Hello, I would like a cutlery tray similar to the one in the photo. The compartment on the far right should be slightly larger than the one on the far left.
Thank you'
Request ID: 60957 I would like to provide an offer
Customer's request: 'Wallet - See photos'
Request ID: 60953 I would like to provide an offer
Customer's request: 'I would like a purse made of pink leather. Like a waiter's wallet with the initials KH'
Request ID: 60826 I would like to provide an offer
Customer's request: 'Church pews'
Request ID: 60789 I would like to provide an offer
Customer's request: 'We are looking wooden door bidding 48×48 cm with gray epoxy paint set of 4 pcs
we need 500set
we are based in Riyadh Saudi Arabia'
Request ID: 60552 I would like to provide an offer
Customer's request: 'Made-to-measure cutlery tray. Length: 71.9 cm. Width: 42.5 cm. Height: 15.5 cm. Compartment division: . Four compartments for cutlery (knives, forks ...)
Three compartments for soup ladle, wooden spoon ...'
Request ID: 60492 I would like to provide an offer
Customer's request: 'Custom-made cutlery tray. Length: 47.5 cm. Width: 52.2 cm. Height: 5 cm. Compartment layout: Standard (compartments for forks, knives, tablespoons, teaspoons, cake forks and a large compartment for serving cutlery).'
Request ID: 60416 I would like to provide an offer
Customer's request: 'Specification:
I would like a custom-made bag in neutrals color palette. The primary material I prefer for the bag is high-quality Leather, ensuring the bag is sturdy and can withstand daily usage. Additionally, I would appreciate if the bag is crafted with some fabric accents or details to enhance its visual appeal.
As for the size, I envision a product that can conveniently hold multiple handheld gaming consoles, as well as any accompanying accessories. For this, it would be beneficial to incorporate multiple compartments, pockets or dividers to organize and safeguard the various items. Please ensure the dimensions are sufficient based on standard handheld console sizes.
I would prefer to try and keep the bag slim as the one I use currently gets bulky with everything in it. A sling style would be preferred, but I am open to other options.
Finally, I value both aesthetics and functionality, so keeping the bag stylish yet practical is integral. This bag should serve as a practical, multi-functional storage solution for handheld consoles, while still maintaining a sophisticated and sleek appearance.'
Request ID: 60412 I would like to provide an offer
Customer's request: 'Custom made female Notebook bag. Material: fabric . Colour: Dark. Size: Individual. Width: 8 cm. Length: 61 cm. Height:40 cm. '
Request ID: 60409 I would like to provide an offer
Customer's request: 'I would like a purse made of ...leather'
Request ID: 60357 I would like to provide an offer
Customer's request: 'I would like a custom-made leather wallet in the color black. It should measure 11x17. It should be made of high-quality, hard-wearing leather to ensure a long service life. Despite its robustness, it should be soft and pleasant to the touch. The color black should be evenly applied to the entire material and should not show any irregularities or color deviations. The dimensions of the wallet should be approx. 11cm x 17cm, with a maximum tolerance of 5 mm. This allows enough space for cash, cards and other items without making it too bulky to carry comfortably in your pocket or jacket.
I have a wallet that serves as a template, the one I make should look as similar as possible. Divided into 3 sections, with the bar that protects the credit cards from falling out.'
Request ID: 60108 I would like to provide an offer
Customer's request: 'Custom made feminine rucksack. Material: fabric. Color: to be determined, maybe similar to the original. Size: Customized. Width: 15 cm. Length: cm. Height: cm. A fabric rucksack with a base measuring 15 cm x 24 cm long, height 32 cm, with metal rings at a distance of 1 cm from the top edge of the rucksack at a distance of 7.5 cm (measured from the center) for a drawstring. The lower attachment of the drawstring is attached to the side. See photo.
An open pocket is sewn onto the front of the rucksack, which is just under 4 cm from the bottom, 7.5 cm high and approx. 35 cm long. The sewn-on front pocket can be closed in the middle with a press stud.'
Request ID: 60030 I would like to provide an offer
Customer's request: 'Hello,
I would like to request a black leather backpack.
Width approx. 33cm, height 42cm and depth 15cm. Top handle.
Outside: robust, but not too thick, weatherproof leather, washable bottom, rather no metal feet. The rucksack should not collapse when put down.
It should be closed from the outside with a waterproof zipper. Zippers must be of the best quality.
The inside is divided into a padded laptop compartment (14" notebook; min. 1.55 cm thick; 31.26 x 22.12 cm) and a large main compartment. A loop with magnetic closure prevents the laptop from slipping out.
The laptop compartment should still have space for a tablet (12.9", min. 6.4mm thick; 28.06 x 21.49cm), as well as pockets on the divider for a cell phone, passport, power bank and pen.
Two additional zippered pockets across the entire width on the inside of the rear part of the backpack. The lower pocket is higher than the upper one.
In the main compartment there should be a loop for storing a bunch of keys (e.g. with an eyelet)
The inside should be made of a light-colored material (not leather) so that the contents are clearly visible.
There should be a compartment for a bottle on the right and left of the backpack. At least a 1 liter water bottle should fit there (approx. 8.5 cm diameter?). The compartment should be made of a stretchy material and/or leather.
I look forward to your first feedback!'
Request ID: 60025 I would like to provide an offer