The idea from Udo from Mömbris:
The customer's rating:
This insert has been made PERFECTLY! Many thanks. It is beautiful and perfectly true to size!!
The story of the Custom made insert made of beech wood:
Negotiation phase
I am happy to provide you an offer to your idea.
The wood that's similar to peach is Cyprus or mahogany,(though mahogany is slightly dark,).I have attached a sample of mahogany and Cyprus for you to see and decide which is similar to your idea.
Thank you
Esther
Hello, Esther,
please take the light wood (Cyprus).
Thanks.
Udo
Thank you for the reply.
Very well I shall use the Cyprus wood.I have attached two files ,kindly translate the measurements in English.
Then I have studied your diagram and I am worried about the measurements some are not tallying with the outside dimensions.kindly have a look.
Thank you
Esther
Thank you for the reply.
Very well I shall use the Cyprus wood.I have attached two files ,kindly translate the measurements in English.
Then I have studied your diagram and I am worried about the measurements some are not tallying with the outside dimensions.kindly have a look.
Thank you
Esther
I have seen your sketch and the measurements are not tallying for example the division of 240 cm the remaining part should be equal, but from the sketch the remaining looks small. Also translate the measurements in English.
Thank you.
Esther
I have seen your sketch and the measurements are not tallying for example the division of 240 cm the remaining part should be equal, but from the sketch the remaining looks small.
Kindly have a look at the attached sketch
Thank you
Esther
Dear Esther,
thank you very much for your questions.
Please have a look to my drawing again: We need to distinguish between outer and inner measures! The main measures of 480 and 303 are outer measures. These measures should be rather exact. They could be 1 mm or so smaller but not larger because the whole application has to fit into my kitchen drawer.
The outer height of the assembly should be approximately 50 mm.
All other measures are inner measures of the different partitions. 240 mm and 220 mm should be minimum measures so that my spoons and forks fit into these partitions.
The measures of 3 times 67 mm and 3 times 83 mm are "circa" measures (approximate). The exact measures depend on how thick the inner and outer "walls" will be.
I did also put some explaining comments onto your design sketch.
Best regards
Udo
Thank you for your reply.
If I maintain the outside measurements of 480mm by 303mm,the tray will appear as I have sketched.
The partitioning of 67mm will be 70mm instead
And the one with 83mm will be 87.7mm
I will use the thickness of 10mm all through
Thank you
Esther
Thank you
Esther
Perfect. Agreed! Thank you. Udo.
Thank you for your reply. I have understood and I can give the cost.
Thank you.
Esther
Hello Esther,
cost calculation accepted.
Looking forward to receive the item.
Good success!
Regards
Udo
Thank you for your reply.
I will start immediately.
Thank you
Esther
Production phase
Thank you for your confirmation I will start immediately and will upload the photos in every stage.
Thank you
Esther
Good luck!
Thank you for your reply. I have started and these are the material to use .
I have send the photos of the material.
Thank you
Esther
Nice material. Go ahead please.
Udo
Thank you for your reply. I have already started on the tray.
Thank you
Esther
Thank you for your reply.The tray is already in the process.I have done the partitioning already.Yet to do the bottom part and the outside finishing
Thank you
Esther
Dear Esther, please go ahead with your work.
I am looking forward to hold the insert in my hands soon.
And - more important - please take care of yourself and stay healthy in these spooky times.
Udo
Thank you for your reply. Am on the process of finishing the tray and furnishing so that they look the same like the bottom.
Thank you.
Esther
Wow, Esther! That's looking great already. Please move on. Best regards. Udo
Thank you for your reply. Am now doing the furnish. I have taken a video.
Thank you.
Esther.
Dear Esther, the video is very interesting for me. I am rather excited to hold the piece in my hands soon. Take care. Udo
Thank you for your reply.This is where I have reached.I am almost finishing the furnishing.
Thank you.
Esther
Dear Esther. The thing is looking really good on the photo. Many thanks. Udo.
Thank you for your reply. I have attached pictures and videos of the tray, it is now complete.
Thank you
Esther
Thank you for your reply. I have attached pictures and videos of the tray, it is now complete.Ready for shipment
Thank you
Esther
Looks really good.
And if it is really less or equal 480 x 303 mm then it will fit perfectly.
Many thanks.
Looks really good.
And if it is really less or equal 480 x 303 mm then it will fit perfectly.
Many thanks.
Thank you for your reply.
The tray is perfectly ready with all measurement exact and Ready for shipment.
Thank you
Esther
Very good, please let it ship.
Take care, Esther.
Regards
Udo
Very good, please let it ship.
Take care, Esther.
Regards
Udo
The final Custom made insert made of beech wood:
Reference: ON003909E-16361
Costs to realize this Custom made insert made of beech wood
Price | |
---|---|
Cost of material |
22.84
|
Cost of labour |
16.32
|
Cost of packaging |
3.26
|
Cost of delivery to local operations manager |
4.08
|
Subtotal – payout to craftsman |
46.5
|
Customer aquisition costs (advertising etc.) |
4.65
|
Handling fee Urban Change Lab |
4.65
|
Shipping costs from Kenya to Deutschland* |
50
|
VAT (Deutschland)* |
20.1
|
Total |
125.9
|
Leave a Reply