The idea from Udo from Mömbris:
An insert made of beech wood or similar for a cutlery drawer, see drawing.
The customer's rating:
Automated Translation 08 Dec 2020 5:37 pm
08 Dec 2020 1:29 pm: Udo
This insert has been made PERFECTLY! Many thanks. It is beautiful and perfectly true to size!!
This insert has been made PERFECTLY! Many thanks. It is beautiful and perfectly true to size!!
The story of the Custom made insert made of beech wood:
Negotiation phase
Esther Oriku 30 Jul 2020 9:51 pm
Hello Udo
I am happy to provide you an offer to your idea.
The wood that's similar to peach is Cyprus or mahogany,(though mahogany is slightly dark,).I have attached a sample of mahogany and Cyprus for you to see and decide which is similar to your idea.
Thank you
Esther
I am happy to provide you an offer to your idea.
The wood that's similar to peach is Cyprus or mahogany,(though mahogany is slightly dark,).I have attached a sample of mahogany and Cyprus for you to see and decide which is similar to your idea.
Thank you
Esther
Automated Translation 31 Jul 2020 5:49 pm
31 Jul 2020 12:31 pm: Udo
Hello, Esther,
Hello, Esther,
please take the light wood (Cyprus).
Thanks.
Udo
Esther Oriku 01 Aug 2020 9:06 am
Hello Udo,
Thank you for the reply.
Very well I shall use the Cyprus wood.I have attached two files ,kindly translate the measurements in English.
Then I have studied your diagram and I am worried about the measurements some are not tallying with the outside dimensions.kindly have a look.
Thank you
Esther
Thank you for the reply.
Very well I shall use the Cyprus wood.I have attached two files ,kindly translate the measurements in English.
Then I have studied your diagram and I am worried about the measurements some are not tallying with the outside dimensions.kindly have a look.
Thank you
Esther
Esther Oriku 04 Aug 2020 8:51 pm
Hello Udo,
Thank you for the reply.
Very well I shall use the Cyprus wood.I have attached two files ,kindly translate the measurements in English.
Then I have studied your diagram and I am worried about the measurements some are not tallying with the outside dimensions.kindly have a look.
Thank you
Esther
Thank you for the reply.
Very well I shall use the Cyprus wood.I have attached two files ,kindly translate the measurements in English.
Then I have studied your diagram and I am worried about the measurements some are not tallying with the outside dimensions.kindly have a look.
Thank you
Esther
Esther Oriku 07 Aug 2020 8:45 pm
Hallo Udo.
I have seen your sketch and the measurements are not tallying for example the division of 240 cm the remaining part should be equal, but from the sketch the remaining looks small. Also translate the measurements in English.
Thank you.
Esther
I have seen your sketch and the measurements are not tallying for example the division of 240 cm the remaining part should be equal, but from the sketch the remaining looks small. Also translate the measurements in English.
Thank you.
Esther
Esther Oriku 08 Aug 2020 9:34 pm
Hallo Udo.
I have seen your sketch and the measurements are not tallying for example the division of 240 cm the remaining part should be equal, but from the sketch the remaining looks small.
Kindly have a look at the attached sketch
Thank you
Esther
I have seen your sketch and the measurements are not tallying for example the division of 240 cm the remaining part should be equal, but from the sketch the remaining looks small.
Kindly have a look at the attached sketch
Thank you
Esther
Automated Translation 10 Aug 2020 7:37 am
09 Aug 2020 9:07 pm: Udo
Dear Esther,
thank you very much for your questions.
Please have a look to my drawing again: We need to distinguish between outer and inner measures! The main measures of 480 and 303 are outer measures. These measures should be rather exact. They could be 1 mm or so smaller but not larger because the whole application has to fit into my kitchen drawer.
The outer height of the assembly should be approximately 50 mm.
All other measures are inner measures of the different partitions. 240 mm and 220 mm should be minimum measures so that my spoons and forks fit into these partitions.
The measures of 3 times 67 mm and 3 times 83 mm are "circa" measures (approximate). The exact measures depend on how thick the inner and outer "walls" will be.
I did also put some explaining comments onto your design sketch.
Dear Esther,
thank you very much for your questions.
Please have a look to my drawing again: We need to distinguish between outer and inner measures! The main measures of 480 and 303 are outer measures. These measures should be rather exact. They could be 1 mm or so smaller but not larger because the whole application has to fit into my kitchen drawer.
The outer height of the assembly should be approximately 50 mm.
All other measures are inner measures of the different partitions. 240 mm and 220 mm should be minimum measures so that my spoons and forks fit into these partitions.
The measures of 3 times 67 mm and 3 times 83 mm are "circa" measures (approximate). The exact measures depend on how thick the inner and outer "walls" will be.
I did also put some explaining comments onto your design sketch.
Best regards
Udo
Esther Oriku 10 Aug 2020 9:40 pm
Hello Udo.
Thank you for your reply.
If I maintain the outside measurements of 480mm by 303mm,the tray will appear as I have sketched.
The partitioning of 67mm will be 70mm instead
And the one with 83mm will be 87.7mm
I will use the thickness of 10mm all through
Thank you
Esther
Thank you for your reply.
If I maintain the outside measurements of 480mm by 303mm,the tray will appear as I have sketched.
The partitioning of 67mm will be 70mm instead
And the one with 83mm will be 87.7mm
I will use the thickness of 10mm all through
Thank you
Esther
Thank you
Esther
Automated Translation 12 Aug 2020 7:49 pm
12 Aug 2020 2:05 pm: Udo
Perfect. Agreed! Thank you. Udo.
Perfect. Agreed! Thank you. Udo.
Esther Oriku 13 Aug 2020 6:47 pm
Hallo Udo
Thank you for your reply. I have understood and I can give the cost.
Thank you.
Esther
Thank you for your reply. I have understood and I can give the cost.
Thank you.
Esther
Automated Translation 14 Aug 2020 6:29 am
14 Aug 2020 12:31 am: Udo
Hello Esther,
cost calculation accepted.
Looking forward to receive the item.
Good success!
Regards
Udo
Hello Esther,
cost calculation accepted.
Looking forward to receive the item.
Good success!
Regards
Udo
Esther Oriku 14 Aug 2020 7:01 am
Hallo Udo
Thank you for your reply.
I will start immediately.
Thank you
Esther
Thank you for your reply.
I will start immediately.
Thank you
Esther
Production phase
Esther Oriku 18 Aug 2020 7:10 pm
Hallo Udo.
Thank you for your confirmation I will start immediately and will upload the photos in every stage.
Thank you
Esther
Thank you for your confirmation I will start immediately and will upload the photos in every stage.
Thank you
Esther
Automated Translation 19 Aug 2020 1:38 pm
19 Aug 2020 11:26 am: Udo
Good luck!
Good luck!
Esther Oriku 26 Aug 2020 9:46 pm
Hallo udo
Thank you for your reply. I have started and these are the material to use .
I have send the photos of the material.
Thank you
Esther
Thank you for your reply. I have started and these are the material to use .
I have send the photos of the material.
Thank you
Esther
Automated Translation 27 Aug 2020 11:24 am
27 Aug 2020 10:54 am: Udo
Nice material. Go ahead please.
Udo
Nice material. Go ahead please.
Udo
Esther Oriku 02 Sep 2020 9:23 pm
Hello Udo,
Thank you for your reply. I have already started on the tray.
Thank you
Esther
Thank you for your reply. I have already started on the tray.
Thank you
Esther
Esther Oriku 07 Sep 2020 12:45 pm
Hello Udo.
Thank you for your reply.The tray is already in the process.I have done the partitioning already.Yet to do the bottom part and the outside finishing
Thank you
Esther
Thank you for your reply.The tray is already in the process.I have done the partitioning already.Yet to do the bottom part and the outside finishing
Thank you
Esther
Automated Translation 08 Sep 2020 2:47 pm
07 Sep 2020 10:17 pm: Udo
Dear Esther, please go ahead with your work.
I am looking forward to hold the insert in my hands soon.
Dear Esther, please go ahead with your work.
I am looking forward to hold the insert in my hands soon.
And - more important - please take care of yourself and stay healthy in these spooky times.
Udo
Esther Oriku 13 Sep 2020 6:44 pm
Hallo udo.
Thank you for your reply. Am on the process of finishing the tray and furnishing so that they look the same like the bottom.
Thank you.
Esther
Thank you for your reply. Am on the process of finishing the tray and furnishing so that they look the same like the bottom.
Thank you.
Esther
Automated Translation 15 Sep 2020 5:57 pm
15 Sep 2020 12:26 pm: Udo
Wow, Esther! That's looking great already. Please move on. Best regards. Udo
Wow, Esther! That's looking great already. Please move on. Best regards. Udo
Esther Oriku 18 Sep 2020 5:30 pm
Hallo Udo
Thank you for your reply. Am now doing the furnish. I have taken a video.
Thank you.
Esther.
Thank you for your reply. Am now doing the furnish. I have taken a video.
Thank you.
Esther.
Automated Translation 22 Sep 2020 9:56 am
19 Sep 2020 8:08 pm: Udo
Dear Esther, the video is very interesting for me. I am rather excited to hold the piece in my hands soon. Take care. Udo
Dear Esther, the video is very interesting for me. I am rather excited to hold the piece in my hands soon. Take care. Udo
Esther Oriku 23 Sep 2020 9:36 pm
Hello .Udo
Thank you for your reply.This is where I have reached.I am almost finishing the furnishing.
Thank you.
Esther
Thank you for your reply.This is where I have reached.I am almost finishing the furnishing.
Thank you.
Esther
Automated Translation 27 Sep 2020 1:58 pm
26 Sep 2020 8:01 pm: Udo
Dear Esther. The thing is looking really good on the photo. Many thanks. Udo.
Dear Esther. The thing is looking really good on the photo. Many thanks. Udo.
Esther Oriku 28 Sep 2020 8:22 pm
Hello Udo
Thank you for your reply. I have attached pictures and videos of the tray, it is now complete.
Thank you
Esther
Thank you for your reply. I have attached pictures and videos of the tray, it is now complete.
Thank you
Esther
Esther Oriku 29 Sep 2020 10:56 am
Hello Udo
Thank you for your reply. I have attached pictures and videos of the tray, it is now complete.Ready for shipment
Thank you
Esther
Thank you for your reply. I have attached pictures and videos of the tray, it is now complete.Ready for shipment
Thank you
Esther
Automated Translation 30 Sep 2020 2:24 pm
29 Sep 2020 6:58 pm: Udo
Looks really good.
And if it is really less or equal 480 x 303 mm then it will fit perfectly.
Many thanks.
Looks really good.
And if it is really less or equal 480 x 303 mm then it will fit perfectly.
Many thanks.
Automated Translation 27 Oct 2020 4:23 pm
29 Sep 2020 6:58 pm: Udo
Looks really good.
And if it is really less or equal 480 x 303 mm then it will fit perfectly.
Many thanks.
Looks really good.
And if it is really less or equal 480 x 303 mm then it will fit perfectly.
Many thanks.
Esther Oriku 02 Nov 2020 10:27 am
Hello. Udo.
Thank you for your reply.
The tray is perfectly ready with all measurement exact and Ready for shipment.
Thank you
Esther
Thank you for your reply.
The tray is perfectly ready with all measurement exact and Ready for shipment.
Thank you
Esther
Automated Translation 02 Nov 2020 5:02 pm
02 Nov 2020 1:20 pm: Udo
Very good, please let it ship.
Very good, please let it ship.
Take care, Esther.
Regards
Udo
Automated Translation 06 Nov 2020 2:29 pm
02 Nov 2020 1:20 pm: Udo
Very good, please let it ship.
Very good, please let it ship.
Take care, Esther.
Regards
Udo
The final Custom made insert made of beech wood:
Material: Cyprus
Reference: ON003909E-16361
Reference: ON003909E-16361
Costs to realize this Custom made insert made of beech wood
| Price | |
|---|---|
| Cost of material |
22.84
|
| Cost of labour |
16.32
|
| Cost of packaging |
3.26
|
| Cost of delivery to local operations manager |
4.08
|
| Subtotal – payout to craftsman |
46.5
|
| Customer aquisition costs (advertising etc.) |
4.65
|
| Handling fee Urban Change Lab |
4.65
|
| Shipping costs from Kenya to Deutschland* |
50
|
| VAT (Deutschland)* |
20.1
|
| Total |
125.9
|
*Shipping costs and VAT vary depending on your location.
Leave a Reply