custom made bathtub board for a notbook and a wine glass

Hello Steven, I am glad to provide an offer for your request. I would like you to specify the dimensions of your bathtub so that the board is made in a custom size for you. With the dimensions, I would be able to make sketches of the product and provide a suitable quote of the price. Thank you.

05 Nov 2019 2:24 pm: Steven
Hello, Oscar,

I would like the bathtub tray to be fixed in such a way that it cannot slide back or front. The supports of the tray on the tub should be provided with fleece to avoid damage to the tub wall. I would like to vary the height of the shelf as in the sketch I drew. Maximum however on 15cm downward. A tablet / laptop (14 inches) should be placed on the shelf if possible. A holder for a juice glass would be great. So that this doesn't fall over at a small vibration. Putting down a wine glass would also be great but is not a must. The tray should also have a place for a small rolled towel and a small bowl for nibbles and possibly 1 to 2 shampoos.

Hello Steven. Thank you for your feedback. I will design the bathtub board with the specifications you have provided and share the sketches with you. I would also suggest that instead of fleece, rubber could be used. It would perform the dual functions of avoiding damage to the tub wall and preventing it from sliding back and forth. What do you think?

06 Nov 2019 10:28 am: stem
Yeah, that's a good idea. Which material do you recommend for the filing?
Could you tell me the extra cost of the Maragonie material? That I have a comparison of how much it would cost more.

Hello, the board would be made out of cedar wood. The handles will be made out of metal and the rubber will be placed on the part of the board in contact with the bathtub. I have provided a breakdown of costs of making the bathtub board.

Hello Steven, the Maragonie material is not available. The board will be made out of cedar wood. The handles will be made out of metal and the rubber will be placed on the part of the board in contact with the bathtub. I have provided a breakdown of costs of making the bathtub board.
Hello

10 Nov 2019 3:17 pm: Steven
Hello,
the price fits, 🙂
What dimensions did you have in mind for the board and what division?
Does the wood still get a varnish or glaze? It should match the bathtub and be modern and, above all, durable.
Do you have a sketch?

Hello Steven. I have provided a sketch of the board. The woard will have a width of 25cm and will be 12cm deep. The wood will be varnished to protect it. It will have a deep brown mahogany finish.

12 Nov 2019 1:26 pm: Steven
Hello, it's looking good. But I wanted to let the board in the bathtub a bit. Since the tub wall is quite high, I would like this board in the height is adjustable. Furthermore, I would like to have a border around the board, so that possible billets or even liquids do not get into the tub when they fall down. Could you also provide a small board on which I can put a tablet if I don't want to use a laptop? So the board should be removable again.
If the holders for juice glass or shampoo no longer work due to the height adjustment, could you choose a thicker wood and mill in these edgings?

I am aware that this will surely be a bit more expensive than your estimated price 😉

Hello Steven. Unfortunately I am unable to come up with a design that will have an adjustable height and still be durable. If this is an important feature of the bathtub board, I am sorry that I would have to decline your request.

14 Nov 2019 2:58 pm: Steven
Hi, I would also be happy with a fixed depth of 7cm. So that no adjustment in height or depth is required any more. For the juice holder and shampoo holder I would like to have a solution that does not go further into the depth. Thus possibly a milled hollow for the juice glass / shampoo. The only important thing is that the laptop has the comfortable height 🙂
Another idea would be to make the snack bowl as a hollow so that I don't have to put an extra bowl on it anymore.
The border of the board would also not be a must if it would destroy the appearance of the beautiful plate.

Hello Steven. Thank you for your response. I would be able to make a board based on these instructions. I am ready to start on it.

Hello Steven. Thank you for your response. I would be able to make a board based on these instructions. I am ready to start on it.

19 Nov 2019 10:43 am: stem
Hello, I'd like to have a sketch of your idea of the board to see if it fits to my size. and how you would like to realize the 7cm fixed depth.

Hello Steven.
Please find attached the sketch of the design of the board. Let me know if the dimensions and design fit with what you were looking for.

24 Nov 2019 4:07 pm: Steven
Hi, we'd like to have the board a little wider. See picture. Furthermore, we would like to have the adjustments drawn in. It would be important to us that the bowl, shampoo holder and juice holder are rounded. This is better to clean and also optically it looks better. We would also like to have rounded off all other corners.that would be optically important. Could you make a sketch again and possibly focus on the rounds?

Hello Steven,
I might not be able to produce a rounded design as you would like. Unfortunately the equipment I currently have would not be able to produce curvy shaped furniture.

Hello Steven,
I would be able to make the design of the board more rounded. I'll share with you the design of the bathtub board with a rounded design when I finish working on it. Thank you

04 Dec 2019 10:47 am: stem
Hello,
could you send me a sketch again? please also briefly sketch the view from top.
I would then send you the colour request after the assignment. 🙂 If that's okay.

Hello Steven,
I apologise for the delayed response. Please find attached sketches of the bathtub board with rounded corners and round holders for the shampoo and juice glass. I have provided a top and side view of the board. Tell me what you think of the changes.

19 Dec 2019 7:14 pm: Steven
Hi, that looks great. We measured the tub again and also on the basis of the enclosed sketch your measurements were not correct. So please change the 91cm to 77cm, please also consider that we have adapted the division of the dimensions. The lateral safety, which we had entered afterwards, we would now remove again. We would also remove a shell, since we now have the board shorter. We have described the shells once with the inner diameter. We have also added a picture where you can see the colour and structure of the bathroom furniture. Could you try to reproduce this as well as possible on the board?

It would be great if you could adjust the price again based on the changes, since we are now coming with shorter.
Then everything should fit and we can place the order.

Please try to inquire quietly after the assignment if you are uncertain. 🙂

Hello Steven,
I have attached a picture of the type of board that closely matches the one you have sent me. I have noted the changes and will revise the measurements accordingly. I have also revised the price. I hope it is suitable. Thanks

The photos attached show the cutting of the wood and its processing.

05 Jan 2020 4:57 pm: Steven
Hello, I'm really curious to see what happens next. Please make sure that you treat the wood in a way that you come close to my color example 😉

Hello, I will try to match your color example as close as possible

09 Jan 2020 6:09 pm: Steven
Great 🙂 then I am curious about the next steps.

Helo Steven. This is the assembly of the board. I have changed the design slightly to make the board weigh less and look more aesthetically pleasing. The next stage is the placement of the holders for the shampoo and the juice glass.

11 Jan 2020 10:49 am: Steven
Hello,

It is important that you seal the edges where the woods meet. So that no water gets into the gaps. This prevents the formation of mould. Please seal all these places.

I sent you the measurements for your painting in the appendix. Please check if they fit to your change now. If not, please adjust this.

Many greetings

11 Jan 2020 10:49 am: Steven
Hello,

It is important that you seal the edges where the woods meet. So that no water gets into the gaps. This prevents the formation of mould. Please seal all these places.

I sent you the measurements for your painting in the appendix. Please check if they fit to your change now. If not, please adjust this.

Many greetings

11 Jan 2020 10:49 am: Steven
Hello,

It is important that you seal the edges where the woods meet. So that no water gets into the gaps. This prevents the formation of mould. Please seal all these places.

I sent you the measurements for your painting in the appendix. Please check if they fit to your change now. If not, please adjust this.

Many greetings

Hello Steven. Thank you for indicating the need to seal the edges. I will do so. I have also seen the measurements you have sent. I will adjust the board as requested.

14 Jan 2020 4:34 pm: Steven
Okay, great. Always remember that this is a board that is above the bathtub and therefore exposed to high humidity.

Hello Steven, Yes I will keep this in mind

17 Jan 2020 5:59 pm: Steven
Hi super I am curious about the next step 🙂

Hello Steven, working on the holders for the juice and the shampoo, will update you with pictures in a few days

26 Jan 2020 11:09 am: Steven
OK, I'm curious 😉

Hello Steven, I apologise for the delays in communication and feedback. I have been unwell, and as such, could not progress with your order. I am recuperating and will update you with pictures of the progress of your order.
Kind regards.

Hello Steven, I would like to inform you that unfortunately the cost of production has exceeded my initial quote as had been agreed. The board needs to have rounded corners and circular holders for the juice glass and shampoo, and the cost associated with achieving this would result in a loss for me if I were to continue pursuing this project with the available budget. If possible, I would kindly request for an additional 40 euros to facilitate the completion of the project. However, if this is not possible then I would suggest that another craftsperson be selected to complete the project.
Kind regards.

Hello, the additional 40 euros would aid in the costs of hiring equipment to facilitate the making of the round holders. Producing curved/rounded edges requires specialized equipment that I currently do not have. Thus the need for hiring

Hello Steven,
Apologies for the late response. I would like to inform you that unfortunately the cost of production has exceeded my initial quote as had been agreed. The board needs to have rounded corners and circular holders for the juice glass and shampoo, and the cost associated with achieving this would result in a loss for me if I were to continue pursuing this project with the available budget. If possible, I would kindly request for an additional 40 euros to facilitate the completion of the project. I apologise for any inconvenience caused.
The additional 40 euros would aid in the costs of hiring equipment to facilitate the making of the round holders. Producing curved/rounded edges requires specialized equipment that I currently do not have. Thus the need for hiring. If this is done, I can assure delivery to the Urban Change Lab by the next weekend.
However, if this is not possible then I would suggest that another craftsperson be selected to complete the project. Kindly let me know how you wish to proceed.
Kind regards.
Oscar.

Hallo Steve.
My name is Esther and I'll be taking over your order. I have been briefed on your specifications and I will begin but before that kindly give me the measurements of,the radius of the shampoo, glass holder and the the depth. Also I suggest the first measurements that you had given 91cm, this would be good enough to accommodate the laptop which is about 30cm long .
Thank you

Hallo Steve
My name is Esther and I'll be taking over your order. I have been briefed on your specifications and I will begin but before that kindly give me the measurements of,the radius of the shampoo, glass holder and the the depth. Also I suggest the first measurements that you had given 91cm, this would be good enough to accommodate the laptop which 36cm.on the edge of the board there's 15cm each, there is 47cm remaining, remove 36cm for the laptop. 11 cm will remain, how can we utilize for the shampoo holder,juice holder and towel, so 77cm will be so squeezed.
Thank you
Esther

11 Mar 2020 8:52 pm: Steven
Hello,
i do not understand the dimensions of you right now. I took the measurements again from the bathtub. Since this bathtub is oval, we have no parallel sides. Since we would like to have the board slightly recessed in the tub, since the tub is relatively deep.
The laptop which is used there is 34cm wide and 24cm deep. We can also use the 15cm shelf for towel and shampoo holders. But I would like to keep the dimensions as they are in the drawing I uploaded again.
I have also included the scale drawing of the tub.

The glass holder should have an inner diameter of 8 cm and a height of 7 to 8 cm.
With the shampoo holder would also be a bowl possible that we put the shampoo inside (possibly use the 15cm shelf)
If a towel holder was possible, we could also make a slit in the 15cm shelf where we could hang the towel.

The tub is a free-standing tub.

If you have any further questions, please do not hesitate to contact me.

Hallo Steve.
Thank you for your clarification. I will start the tub immediately and will be updated on the progress.
Thank you
Esther

18 Mar 2020 9:28 am: Steven
Ok super am now very curious about the result.

Hallo Steve
Thank you for your reply.
With the thickness of 7cm to 8cm I will not get that piece from cedar wood. I have a similar wood that jacaranda and will get one piece with the thickness. I have done a sketch but not with the exact measurements for you to see. The edges will be rounded and the glass holder will be round. The price quoted by Oscar was slightly down .the cost will be higher. The material ksh 3500 .the labour ksh 2000. The total ksh 6600. Am very sorry for the inconvenience of the prices.
Look at the sketch and confirm whether am on the right track.
Thank you
Esther

Hallo Steve
Thank you for your reply.
With the thickness of 7cm to 8cm I will not get that piece from cedar wood. I have a similar wood that jacaranda and will get one piece with the thickness. I have done a sketch but not with the exact measurements for you to see. The edges will be rounded and the glass holder will be round. The price quoted by Oscar was slightly down .the cost will be higher. The material ksh 3500 .the labour ksh 2000. The total ksh 6600. Am very sorry for the inconvenience of the prices. Look at the sketch and confirm whether am on the right track.
Thank you.
Esther

21 Mar 2020 1:37 pm: Steven
Hello, okay. Please make sure you get the exact measurements. As these are important.

Hallo Steve
Thank you for your reply.
I will work on the exact measurements and show pictures stage by stage.
Thank you
Esther

30 Mar 2020 12:45 pm: Steven
ok I am curious about the first pictures. 🙂

Hallo Steve
Thank you for your reply.
This is the first picture 'then I will do the curving and set for the glass ,laptop, shampoo,and towel.
Thank you
Esther

03 Apr 2020 8:11 am: Steven
Hello, unfortunately I do not see a new picture here. Could you upload it again?

03 Apr 2020 2:50 pm: Steven
Hi, now I stand your pictures, it seems from the picture the dimensions are not yet correct, so I have added another picture. I asked for the measurements of one of them, based on your picture. As I said the measurements are very important, if they don't fit I can't use the board.
The wooden sides which I marked with a text, we don't need, so you can take them off again.
The deep one to the back of the board seems to be optically correct, could you tell me again which one it is now?

Hallo Steve
Am very sorry to have taken long to reply. I have started working on the exact measurements and where am taking the video is on the laptop measurements from there then I will do the glass holders,shampoo holder and the towel.
Thank you.
Esther

16 Apr 2020 9:48 am: Steven
No problem, I recently uploaded a picture regarding the dimensions. Since these are really very important. It is not bad if it takes a while, as long as the result fits 🙂

Hallo Steve
Thank you for your reply. I will keep the measurements intact cause they are important. This is the progress as at now. I will be very happy if am on the right track.
Thank you
Esther

Hallo Steve.
Thank you for your reply. I will keep the measurements intact cause they are important. This is the progress as at now. I will be very happy if am at the right track.
Thank you
Esther

Hallo Steve.
Thank you for your reply. I will keep the measurements intact cause they are important. This is the progress as at now. I will be very happy if am at the right track.
Thank you
Esther

20 Apr 2020 9:59 am: Steven
Hello,
this looks good already, please remember the rubber coating on the sides. If possible, maybe even around the corner, so that we avoid scratching the bathtub. Since it is an environment with very high humidity, please take this into account when painting / sealing.

Many greetings

Hello Steve.
Thank you for your reply. I will put the rubber coating after finishing with furnish. Am still on the process of furnishing and have sent pictures of the bathtub.
Thank you.
Esther

24 Apr 2020 8:07 pm: Steven
Looks good.

Hello Steve
Thank you for your reply. I have put the rubber under so that it will be smooth. I have taken the pictures and uploaded. It is finished.
Thank you.
Esther

06 May 2020 10:35 am: Steven
Hello, I don't like the rubber, could you please cut it straight so that no cracks or the like appear at the edges. Could you please also apply a layer of varnish. In some places you can see spots.

Many greetings

Hello Steve
Thank you for your reply. I have done the final changes and the smoothness. I have also furnished. I have uploaded the pictures.
Thank you
Esther

10 May 2020 4:12 pm: Steven
Hallo, now its okay

Hello Steve
Thank you for your reply. It's finished and ready to be delivered.
Thank you.
Esther

14 May 2020 5:59 am: Steven
Ok super

Hey Steven, my name is Noel I'm the local operations manager. I've shared some pictures of the tab with the measurements as made by Esther. I hope they suite your expectations.

20 Jul 2020 2:24 pm: Steven
Everything in the picture is great

Hello Stephen,
I hope all is well I have gotten a feed back in regards to the bathtab that I made,and I am very sorry for the wrong measurments and any inconvince made .I have attached a sketch on the same.Please confirm with me if this what it was supposed to be done.
Thank you and once again im very sorry about it.
Thank you
Esther

15 Oct 2020 7:23 pm: Steven
Hello,
I have now photographed the board once and added the appropriate measurements.
The division can stay as it is, only the length has to be changed.
Maybe you could choose a thinner wood, so that it doesn't get even heavier.
It is important to me, as I have already written several times, that this board can get water off. So it is important that the corners have no slits (picture with question mark attached).
Many greetings
Steven

Hallo Steve.
Thank you for your reply. If we use a thinner wood it means we change the depth of the glass about 5cm instead of 7cm. With the corners let me try to avoid the slit if possible.
Thank you.
Esther

23 Oct 2020 10:47 am: Steven
that would be okay 🙂

Hallo Steve.
Thank you for your reply. I will start to make them bathtub immediately.
Thank you.
Esther