Request your estimate
Initial idea from Achim from Meerbusch:
I would like a drawer insert with the outer dimensions … 108 cm x 27 cm
Partitions as follows – as also seen in the drawing – knife block on the right 50 cm x 27 cm – on the left, division in two compartments of equal size at a height of 5 – 5.5 cm
The story of the Custom made drawer insert:
Negotiation phase
the 6 cutting edges should be sunk in the knife block ('Messerblock' in the drawing) on the right side of the drawer. The handles should rest on the right outside within the drawer.
If walnut is not available mahogany is also OK.
I ask for a short feedback before awarding the contract!
Kind regards
Achim
Thank you for your reply.
Kindly show by arrow where the handle will be.
What do you really mean when you say the edges will be sunk
Walnut will be available.
Thank you
Esther
Sorry to have taken a few days to reply.
Everything is understood.
I will apply walnut.
When I reach that stage will send pictures of the furnish and give an okay.
Thank you.
Production phase
Welcome
Waiting to deliver to Herman.
Thankyou
Esther
Welcome
It's ready to deliver.
Thank you
Esther
It
Super….then please deliver. THANK YOU.
I have done a review of the drawer insert and below are my comments.
1. The quality of wood is very good and up to standard.
2. On the section of the knife block, I have noticed the knives don't completely sink into the wood and there is a part of the knife blade that can be seen.
3. In terms of measurement of the width. At both ends of the insert the measurement comes to 27.1 cm and on the section of the knife block the width is measuring 27.6 cm, however the insert looks very straight and the only time it is noticed is after measuring accurately.
4. On the height, 90 percent of the insert is 5 cm as you request but there is a small section that is 4.8 cm. This is a very minor difference and can't be noticed by looking as in general everything looks very nice.
I believe the above comments are important.
Kind Regards
Herman
The final Custom made drawer insert:
Reference: ON001530E-5222
Do you want something similar?
Do you want your own idea realized?
Costs to realize this Custom made drawer insert
| Product | Qty | Unit Price | Price |
|---|---|---|---|
Cost of material | 1 | 27,99 € | 27,99 € |
Cost of labour | 1 | 17,49 € | 17,49 € |
Cost of packaging | 1 | 6,12 € | 6,12 € |
Cost of delivery to local operations manager | 1 | 4,37 € | 4,37 € |
| Subtotal – payout to craftsman | 55,97 € | ||
| Customer aquisition costs (advertising etc.) | 5,60 € | ||
| Handling fee Urban Change Lab | 5,60 € | ||
| International shipping & Handling fee for logistics partner ((up to 2 kg) 15,00 €) | 15,00 € | ||
| VAT (Import into EU) | 15,61 € | ||
| Total | 97,78 € | ||
Leave a Reply