Cutlery tray

Hello Ursula, I am happy to provide an offer for your idea as soon as possible, in good quality of wood.

Hello Ursula, am ready for your job.
Greetings ziadi

04 Oct 2019 9:48 am: Ursula
Good morning. The drawing is ok, I only ask you to pay attention to the inside dimensions and not to make the partitions too thick.
Then I had asked for a price suggestion for 2 parts, I have not yet received an answer. Many greetings Uschi Wahlandt

Hello Uschi,
Yes I will follow your instructions, and thick of partitions is one cm.
Also on the right side of partition and have confused on that which have 140mm. I have shared my design I tried to make if it will be nice for you?
And on the price suggestion for 2 parts, I am not understanding well?

Since both side are 280mm , on the other side of the boxes where I marked with a question mark, we might have a concern. If I make the first inner size of 100mm, the second of 140mm and addition of 10mm of thickness to each separation , it’s means already 30mm on thickness, then the concern here will be about the remaining inner box within question mark which will be ritually negligible due to only 10mm left for it. My suggestion here is to remove it and add this 10mm to the inner part of 140mm to be 150mm. Otherwise let me know how we go with it.

The suggested price is for only this one boxe. If you want the second we can add prices based on its own size and we can add a second on this same request and I can make both all together.

08 Oct 2019 1:16 pm: Ursula
Hello, Ziadi,
the 10 mm separation is too thick for me. I would like to have a maximum of 5-6 mm, that's how the old division is at the moment.
If that's the way it goes:
5mm – 85mm – 5mm – 85mm – 5mm – 85mm – 5mm – 85mm – 85mm – 5mm – 5mm – 55mm . 5mm
If the separation was 6mm, we'd still have 49mm in the last compartment, that'd do it.
The second box should have the same dimensions. Price idea would be 2 x 70€
Many greetings

Hello Good morning
please find attached file here.
i think you will get more information on how it will look like.

15 Nov 2019 2:54 pm: Ursula
Hello, there,
please divide the upper long compartment as shown, the lower shorter ones into 5 compartments of equal size. I think that's the best way to get ahead.
Many greetings

Hello Ursula,
Okay then, we can make your curtly boxe with one compartment above and the other five compartments same size of 80mm. The separation thickness will end up a little bit smaller like 4mm, isn't it too small in quality precepective and longtivity of the boxe ? Isn't 16 too small for the drawer with according to the regular size of folks and spoons?

20 Nov 2019 8:25 pm: Ursula
Hello, Ziadi,
I made a mistake on the drawing, the page is not 280 mm but 380mm long, sorry.

Hi Ursula,
I will do the new design which have exactly dimensions, after I will show you how it look like. I think the price it will increase little bit.

Hello Ursula,
i have tried to design ,
you can try to take a look on it , if can modifier it

07 Dec 2019 9:53 pm: Ursula
Hello, Ziadi,
the long side = 425 mm, the short side 380 mm. I the inner division is fine.

Hello Ursula,
Now am ready to start your cutlery tray.

12 Dec 2019 9:23 am: Ursula
Hello, Ziadi,
if the long side has 425 mm and the short side 380 mm, then it is o.k. and you can start the job.

Ok thanks
Regards Ursula.

hello Ursula,
Now i have started to work on your project to day. Actually i didn't taken some picture today, but by tomorrow or next tomorrow i will do and then i will share to you.
Greetings Ziadi,

20 Dec 2019 8:15 am: Ursula
Hello, Ziadi,
I'm gonna assume you're doing everything right and I'm looking forward to the first picture.
Many greetings
Ursula

Hello Ursula,
Today i would like to tell you , i have provided a picture where progress is reached.
Many greetings
Ziadi

22 Dec 2019 7:13 am: Ursula
Hello, Ziadi,
that looks very good.
If it is still possible, please leave out the partition in one of the compartments. The proportions do not look good.
Many greetings
Ursula

Hello Ursula,
try to take a look on the picture i have uploaded if is that partition i supposed to remove?
Many greetings
Ziadi

25 Dec 2019 12:14 am: Ursula
Hello, Ziadi,
yes, this is the partition.
Many greetings
Ursula

Hello Ursula,
First of all happy new year for 2020. I would like to tell you about your cutlery tray, actually it already finished
Now am ready to ship it.
Many greetings
Ziadi.

01 Jan 2020 9:40 pm: Ursula
Hello, Ziadi,
thank you, i also wish you a happy new year 2020. if you like, although it is finished, you can tell me something about the cutlery tray. I'm definitely looking forward to that thing.
Many greetings
Ursula