Your idea - ethically custom made
Carpentry and woodwork
Request quote The idea from Daniel from Scharans: Good day! I'm glad that you have come to my attention. We – our family – may soon move into a house and would like to have some cutlery drawers made for our kitchen. I have made an approximate sketch (only the outside dimensions are accurate), which …
Request quote The idea from Alexander from Salzburg: 3 made-to-measure inserts for kitchen shelf with the following external dimensions: Length 33 cm, width 25 cm, height 7 cm. Wood similar to my previous project (cutlery drawer) In front and behind a handle opening https://www.urbanchangelab.com/custom-made-cutlery-tray-2/ The result The story of the 3 made-to-measure inserts for kitchen …
Request quote The idea from Alexander from Salzburg: I would like to have a cutlery tray with the outer dimensions 49 x 51 cm with five compartments in light wood The drawer is 49 cm wide, 51 cm deep and 12 cm high. The height of the cutlery tray should be about 5-7 cm. For …
Request quote The idea from Petra from Herrischried: I would like a cutlery tray with the outer dimensions…31x48cm, height 5 cm Please make 3 divisions for knife, fork and spoon with at least 28cm, and again a 3 times division of the rest The result The story of the cutlery tray with the outer dimensions…31x48cm, …
Request quote The idea from Michael from Ganderkese: Dear Ladies and Gentlemen I would like a wooden drawer insert for cutlery. The insert should be 507/490mm wide, 453mm deep and 55mm high. These are the exact outer dimensions of my current cutlery tray. I would like to point out that the width of the drawer …
Request quote The idea from Maja from München: 3 inserts for cutlery in our 3 kitchen drawers. Material wood, untreated. PDF attached. The result The story of the 3 inserts for cutlery in our 3 kitchen drawers: Negotiation phase Production phase The final 3 inserts for cutlery in our 3 kitchen drawers: Costs to realize …
Request quote The idea from Gerlinde from Lauda-Königshofen: I would like a key rack made of cedar wood: width about 35 cm the height about 30cm 4 possibilities to hang up keys, 2 compartments for spectacles, 1 compartment for an umbrella and surface for coins. I have attached a photo. The result The story of …
Request quote The idea from Oliver from Berlin: I would like two wooden boxes as a drawer insert. I saw a wooden cutlery box on this site, which I liked very much. I would like to order two, for different drawers: 1st Box dimensions: 653 mm x 530 mm x 80 mm (W x D …
Request quote The idea from Isabel from Pforzheim: I would like to have a cutlery box with the outer dimensions..width 23cm length 30cm height 7cm. The box should be placed in a drawer, so it can be very simply designed, without decorations or the like. The subject division should be as follows: 3 longitudinal compartments …
