The idea from Michael from Ganderkese:
Dear Ladies and Gentlemen
I would like a wooden drawer insert for cutlery. The insert should be 507/490mm wide, 453mm deep and 55mm high. These are the exact outer dimensions of my current cutlery tray.
I would like to point out that the width of the drawer is slightly slanted and thus the following dimensions result in the width:
Width top 507 mm
Bottom width 490 mm
Whether the craftsman produces the side walls diagonally (preferred version) or as an alternative straight with a strip on top. which compensates the dimension 490mm to 507mm, I would like to leave to the craftsman. In the depth the walls are rectangular.
I would like a wooden drawer insert for cutlery. The insert should be 507/490mm wide, 453mm deep and 55mm high. These are the exact outer dimensions of my current cutlery tray.
I would like to point out that the width of the drawer is slightly slanted and thus the following dimensions result in the width:
Width top 507 mm
Bottom width 490 mm
Whether the craftsman produces the side walls diagonally (preferred version) or as an alternative straight with a strip on top. which compensates the dimension 490mm to 507mm, I would like to leave to the craftsman. In the depth the walls are rectangular.
With kind regards
Michael Precht
The customer's rating:
Automated Translation 10 Jan 2019 5:35 pm
09 Jan 2019 5:31 pm: Michael
Hayllo Caleb
We are very satisfied with the cutlery tray you made for us. My wife is also very enthusiastic.
The box fits without folding into our drawer and even the sloping side walls you have manufactured perfectly to my measurements.
The box makes a stable impression and we also like its color very much.
If I/we have a similar project again, we would like to contact you.
Hayllo Caleb
We are very satisfied with the cutlery tray you made for us. My wife is also very enthusiastic.
The box fits without folding into our drawer and even the sloping side walls you have manufactured perfectly to my measurements.
The box makes a stable impression and we also like its color very much.
If I/we have a similar project again, we would like to contact you.
Yours sincerely
Michael Precht
The story of the Custom made wooden drawer insert for cutlery:
Negotiation phase
Caleb Nyakaba 18 Oct 2018 5:16 pm
`hello micheal, iam happy to provide an offer for your idea.
Automated Translation 19 Oct 2018 6:51 pm
19 Oct 2018 6:46 pm: Michael
Hello Caleb
Hello Caleb
in regards to your drawing I would like to add:
- Please design the compartments 175-180mm so that both are the same size in depth.
- The depth dimension of 453mm is the same at the bottom as above. Only the side parts are slightly slanted.
Otherwise it looks very good.
Yours sincerely
Michael Precht
Caleb Nyakaba 21 Oct 2018 5:23 pm
hi;micheal now iam ready to realise your idea
Production phase
Caleb Nyakaba 23 Oct 2018 8:25 am
hi micheal now aim ready to realizing your idea.
Caleb Nyakaba 02 Nov 2018 6:06 pm
Hi Michael I am working on your work
Automated Translation 03 Nov 2018 6:16 pm
03 Nov 2018 3:01 pm: Michael
Hello Caleb Nyakaba
Hello Caleb Nyakaba
What I see in the picture looks good until then. I am looking forward to the further course.
Yours sincerely
Michael Precht
Caleb Nyakaba 08 Nov 2018 1:40 pm
Hi Michael I am almost finishing
Caleb Nyakaba 09 Nov 2018 12:44 pm
Hi Michael I am still continuering your work
Caleb Nyakaba 13 Nov 2018 3:52 pm
Sorry for the delay due to happenings beyond control but kindly bear with me.Am making the final touches which will be done in the next few days.
Caleb Nyakaba 14 Nov 2018 1:47 pm
Hi Michael, i am on final touches.
Caleb Nyakaba 18 Nov 2018 3:21 pm
Hi Michael, the product is ready for shipment.
Automated Translation 18 Nov 2018 6:13 pm
18 Nov 2018 6:06 pm: Michael
Hello Caleb Nyakaba
Hello Caleb Nyakaba
I have also shown the picture to my wife and she is looking forward to the finished cutlery box.
It looked really good on the picture.
Thank you so much for your work.
Yours sincerely
Michael Precht
The final Custom made wooden drawer insert for cutlery:
Material: mahogarny
Reference: ON001884E-6505
Reference: ON001884E-6505
Costs to realize this Custom made wooden drawer insert for cutlery
| Price | |
|---|---|
| Cost of material |
29.75
|
| Cost of labour |
21.25
|
| Cost of packaging |
8.5
|
| Cost of delivery to local operations manager |
4.25
|
| Subtotal – payout to craftsman |
63.75
|
| Customer aquisition costs (advertising etc.) |
6.38
|
| Handling fee Urban Change Lab |
6.38
|
| Shipping costs from Kenya to Germany* |
15
|
| VAT (Germany)* |
17.39
|
| Total |
108.9
|
*Shipping costs and VAT vary depending on your location.
Leave a Reply