custom made wax print bomber jacket in red

Hey my name is Phelesia, I’d like to fulfill your request. Unfortunately, Nyambura is currently not available to fulfill the request for you but I’ll equally do a great job.I’ve uploaded images of different fabrics in sstock. I'll still be on the look out for the specific fabric that you want,To fulfill your request I’d like the following measurements in cm
1. Shoulder - Should be shoulder bone to shoulder bone.
2. Bust.
3. Waist.
4. Sleeve length - Shoulder bone to wrist bone
5. Sleeve width - Around bicep
6. Cuff - around wrist
7. Length - full length of the jacket.

(Automatic translation) 04 Dec 2021 11:17 pm: Martin
Phelesia, hey, thanks for the message.
Any chance you can still find the fabric?
Here are the measurements:
1. 40 cm
2. 92 cm
3. 74 cm
4. 62 cm
5. 30 cm
6. 16 cm
7. 60 cm (where should I measure?)
Thanks and greetings, Martin

Hi Martin, I hope you are doing fine, unfortunately the fabric is not available, I've been looking for it since yesterday. The fabric is called kitenge and the manufacturers normally renew the prints after every 2 years, This means that the older ones disappear (like the one you sent) The ones I sent are readily available. Please choose from one of them.

Hi Martin, I hope you are doing fine, unfortunately the fabric is not available, I've been looking for it since yesterday. The fabric is called kitenge and the manufacturers normally renew the prints after every 2 years, This means that the older ones disappear (like the one you sent) The ones I sent are readily available. I've also added some which may interest you, Please choose one of them.

(Automatic translation) 07 Dec 2021 12:03 pm: Martin
Hello Phelesia,
thank you for the suggestions.
Of these I find the most suitable:
SAVE_20211202_182954.jpg
BIs when could I expect to get the jacket?
I understand if I haven't received it yet for Christmas,
perhaps ain photo goes out that I can show then?
Many thanks and greetings, Martin

Hi Martin, Thank you for your response, You've made a good choice, The kitenge is really nice, I like it too... I'm sure it will look good on her.
I would like to clarify on something before I start working on it. What colour of the rib material (The one used on the wrist, neck and waist) do you prefer? Black, red or blue?
and please don't worry about it. I'll work on it as fast as possible, you will probably have the bomber jacket before Christmas.

(Automatic translation) 08 Dec 2021 6:25 pm: Martin
Phelesia, hi,
thank you for asking.
I can't see it so clearly, but it seems to me in the fabric pattern there is also black in it?
If so, happy to use black for the rib fabric.
If you have a dark blue that matches the exact tone in the fabric, happy to use that.
Before Christmas is great, thanks.
HG Martin

True, The better part of the material is black so it's advisable to use a black rib material.
I'll buy all the materials tomorrow and start working on it.

(Automatic translation) 08 Dec 2021 8:21 pm: Martin
Hi, just one more thing:
With the length of the jacket, there I did not know how to measure it.
Therefore, a hint that is probably sufficient:
My wife is 1,81 m tall.
Thanks and greetings

Okay Martin, no problem, I'll use the hint. Again how did you take the rest of the measurements? Fitting (very close to the skin) or loosely?

(Automatic translation) 08 Dec 2021 9:12 pm: Martin
Would say fitting.

Okay, Thanks for your response Martin. I think I now have all the information that I needed.

Hi Martin, The jacket is ready, please have a look at the photos and let me know if you what you think about it, Thank you.

(Automatic translation) 15 Dec 2021 12:36 am: Martin
Phelesia, hi,
thank you very much for the photos.
The jacket looks really great!
I especially like how you joined the fabrics together on the front, continuing the line.
Looking forward to being able to give them away.
Thank you very much, also that it went so fast!
Best regards, Martin

Hi Martin, I hope you are doing fine, I'm glad that you like the Jacket and I hope that your wife will love it too..
Thanks for the business, please feel free to order another one again.

(Automatic translation) 15 Dec 2021 10:05 am: Martin
Thank you, and happy holidays!

(Automatic translation) 16 Dec 2021 10:37 am: Prisca Noela Waiganjo
(Automatic translation) 15 Dec 2021 10:05 am: Martin
(Automatic translation) 15 Dec 2021 10:05 am: Martin
Thank you very much and happy holidays!

Hello Martin! This is Nyambura.
I hope you are well and thank you once again for the order you made.
At the time you made the order I wasn't in a position to attend to you as quickly as was needed.
Also, please accept my apologies for the delay in responding to you as I was looking for the same fabric to make a replacement jacket but it is currently out of stock.

I have however attached an option that is slightly similar as well as others to look through, should the similar one not work
for you.

Once you make your choice, I'll work on getting it to you at the soonest.

My apologies once again and thank you for your patience.

Best Regards,
Nyambura.

(Automatic translation) 10 Mar 2022 12:46 am: Martin
Hello Nyambura,

thank you for your message.
Do you perhaps still have the fabric I had picked out quite originally?
It is red and turquoise and I think it was one of your fabrics.
The file is called: Screenshot_20191008-140042_1-1.jpg
Many thanks and greetings, Martin

Hello Martin,
You are very welcome.
Sadly, that was a print that was available in 2019 and isn't in the shops any more.

My apologies for having to put you through the selecting process again.

I've added two more options that you could have a look through and share your thoughts.

Also, perhaps you could share your design preferences in terms of shapes and color schemes to guide my search for prints that will appeal to you.

Best Regards,
Nyambura.

(Automatic translation) 12 Mar 2022 2:19 pm: Martin
Hello Nyambura,

thank you for the new suggestions.
We like this fabric very much:
IMG_20220309_111419.jpg
We are looking forward to the jacket with this pattern.

Best regards,
Martin

Hello Martin!

That's fantastic! Thank you.
I'll get it tomorrow and have it ready by Wednesday.

Best Regards,
Nyambura.

(Automatic translation) 20 Mar 2022 9:42 pm: Martin
Wonderful, thank you.

You're welcome Martin. The jacket is ready now.

I've attached some photos of the production phase and the completed jacket. Thank you once again, for your order.

Best Regards,
Nyambura.

(Automatic translation) 24 Mar 2022 11:11 am: Martin
Thank you looks very good.
We are looking forward to the jacket.
Best regards, Martin

Fantastic Martin!

I'm happy to you like it.
Thanks again for your order.

Best Regards,
Nyambura.

(Automatic translation) 25 Mar 2022 7:46 am: Martin
Thank you Nyambura,
best regards, Martin

Hi Martin, I hooe you are well.

My sincere apologies for the fitting if the jacket and thank you for your patience and taking the pictures to relay the fitting.

In order to avoid another blunder, may I kindly request you to take measurements of a jacket or hoodie that fits her well so that I use those measurements instead of the body meaaurements in this chat.

I had added 2.5 inches of allowance from the measurements given and it still wasnt enough.

Please see the attached image named Bomber Measure Guide for how to measure.

Also, if you could send measurements of a shirt that fits you well, I would be happy to make you a complimentary shirt with accents from the bomber jacket fabric, for your trouble.

Many Thanks,
Nyambura.

Martin 26 Jun 2022 5:47 pm
Nyambura, hi,

here finally hopefully usable measurements:

Shoulder 37, Christ 52, waist ok, sleeve length 65,
Front length 58
Leeves too tight

So the most important thing would be that the sleeves are long enough and not too tight anymore,
and that there is more space at the shoulder.

Thank you very much for the shirt offer, do you mean a men's shirt?
Many thanks and greetings,
Martin

Hi Martin,

Thanks again for the measurements. They'll be of great help.

You're very welcome for the shirt, and yes, I mean a men's shirt.
When you send the shirt measurements please also send the bicep measurement for the bomber jacket. .

Many Thanks,
Nyambura.

(Automatic translation) 11 Jul 2022 5:35 pm: Martin
Nyambura, hi,

my wife's biceps has a circumference of 28 cm.
The sleeve can be freely like wider.

Here are the measurements of one of my shirts:
Basically, I wear slim XL.
The collar size is 41.
The length in the back is from the collar to the lowest hem 80 cm
The shoulder line is 16 cm from the collar to the base of the sleeve respectively
The sleeve itself is then 65 cm long.
Is this information sufficient?
Many thanks and greetings,
Martin

Hi Martin,

Thanks for the measurements. They are okay to work with.

Many Thanks,
Nyambura

(Automatic translation) 13 Jul 2022 6:19 pm: Martin
Thank you, looking forward to the result.
Sincerely, Martin

Great! I'll share the progress next week.

Many Thanks,
Nyambura

(Automatic translation) 21 Jul 2022 12:07 pm: Martin
Perfect, thank you

Hi Martin,

I hope you are well.
So far, the bomber jacket is ready and now working on the shirt.
Thank you once again,
Nyambura.

(Automatic translation) 29 Jul 2022 11:56 am: Martin
Nyambura hi,
looks great, thank you!
Sincerely, Martin

You're welcome Martin.
I'll send more pictures next week as I had to travel.

Many Thanks,
Nyambura.

(Automatic translation) 01 Aug 2022 12:02 am: Martin
All right, thank you.

Thanks very much for your understanding.

(Automatic translation) 10 Aug 2022 3:40 pm: Martin
See you soon.

Hi Martin,

Sorry I had a bit of trouble accessing net.
Please see the final attached photos of the jacket and shirt with added allowance just to be safe and let me know what you think.

Many Thanks again for your order!

Nyambura.

(Automatic translation) 27 Aug 2022 10:07 pm: Martin
Nyamhura, hi,
thank you, everything looks very good.
Kind regards,
Martin

Great! Thank you.

(Automatic translation) 29 Aug 2022 8:02 am: Martin
Thank you, best regards.

(Automatic translation) 01 Sep 2022 10:27 am: Victoria Achieng
(Automatic translation) 29 Aug 2022 8:02 am: Martin
(Automatic translation) 29 Aug 2022 8:02 am: Martin
Thank you, with kind regards.

(Automatic translation) 07 Sep 2022 9:21 am: Victoria Achieng
(Automatic translation) 01 Sep 2022 10:27 am: Victoria Achieng
(Automatic translation) 01 Sep 2022 10:27 am: Victoria Achieng
(Automatic translation) 29 Aug 2022 8:02 am: Martin
(Automatic translation) 29 Aug 2022 8:02 am: Martin
Thank you, with kind regards.