The idea from Edwin from Hart im Zillertal:
Dear Urbanchangelab team,
I would like to order a cutlery tray according to the following illustration.
Cutlery drawer
Outside dimensions: 55 cm wide x 6 cm high x 50 cm deep
Classification approximately according to the attached plan
Guide rail below with an external distance of max. 52 cm
Dimensions and interior division according to the attached drawing.
If you have any questions, please simply contact us.
The customer's rating:
Automated Translation 23 Aug 2020 1:21 pm
22 Aug 2020 12:51 pm: Edwin
The cutlery drawer was manufactured exactly according to the specifications and also processed very cleanly
The cutlery drawer was manufactured exactly according to the specifications and also processed very cleanly
The story of the cutlery tray according to the following illustration:
Negotiation phase
Esther Oriku 02 Mar 2020 8:47 pm
Hallo Edwin
Am happy to provide you with an offer to your idea. I have seen the measurements and I will use the thickness of 1cm.
Thank you
Esther
Am happy to provide you with an offer to your idea. I have seen the measurements and I will use the thickness of 1cm.
Thank you
Esther
Esther Oriku 02 Mar 2020 9:09 pm
Hallo Edwin,
Am happy to provide you with an offer to your idea. Kindly what will be your preferred material to use for your tray. For your tray I suggest we use 1cm thickness. It makes the tray light and attractive. Do you have any preference on your preferred thickness.
Thank you.
Esther
Am happy to provide you with an offer to your idea. Kindly what will be your preferred material to use for your tray. For your tray I suggest we use 1cm thickness. It makes the tray light and attractive. Do you have any preference on your preferred thickness.
Thank you.
Esther
Automated Translation 03 Mar 2020 8:13 pm
03 Mar 2020 4:30 pm: Edwin
Hello, Esther,
As material I would like to have a light wood, like on the photo of your homepage, which I had sent along. As far as the thickness is concerned, I will gladly rely on your recommendation.
LIebe Greetings
Edwin
Hello, Esther,
As material I would like to have a light wood, like on the photo of your homepage, which I had sent along. As far as the thickness is concerned, I will gladly rely on your recommendation.
LIebe Greetings
Edwin
Esther Oriku 04 Mar 2020 6:01 am
Hallo Edwin.
Thank you for your reply.the used was mahogany. With the thickness we shall use 1cm outside dimensions and inside too.
Thank you.
Thank you for your reply.the used was mahogany. With the thickness we shall use 1cm outside dimensions and inside too.
Thank you.
Esther Oriku 04 Mar 2020 7:54 pm
Hallo Edwin,
Thank you for your reply, the used material was mahogany. With the thickness we shall use 1cm outside dimensions a mbv d inside too.
Thank you.
Esther
Thank you for your reply, the used material was mahogany. With the thickness we shall use 1cm outside dimensions a mbv d inside too.
Thank you.
Esther
Production phase
Esther Oriku 10 Mar 2020 8:49 am
Hallo Edwin
Thank you for your reply and I have started to make the tray. I have attached the material to use. Kindly the measurements of the tray is 55cm x 50cm x 6cm. Am not clear on the other drawing of the rail.
Thank you.
Esther
Thank you for your reply and I have started to make the tray. I have attached the material to use. Kindly the measurements of the tray is 55cm x 50cm x 6cm. Am not clear on the other drawing of the rail.
Thank you.
Esther
Esther Oriku 10 Mar 2020 1:37 pm
Hallo Edwin
Thank you for your reply and I have started to make the tray. I have attached the material to use. As stated, the measurements of the tray is 55cm x 50cm x 6cm. Kindly clarify on the rail. Am not clear on the other drawing. Where does it go?
Thank you.
Esther
Thank you for your reply and I have started to make the tray. I have attached the material to use. As stated, the measurements of the tray is 55cm x 50cm x 6cm. Kindly clarify on the rail. Am not clear on the other drawing. Where does it go?
Thank you.
Esther
Automated Translation 11 Mar 2020 9:50 am
10 Mar 2020 5:33 pm: Edwin
The two rails come to the bottom of the cutlery tray. I have reworked my drawing a little bit and hope that it is now better visible.
The two rails come to the bottom of the cutlery tray. I have reworked my drawing a little bit and hope that it is now better visible.
Esther Oriku 13 Mar 2020 11:34 am
Hallo Edwin,
Thank you for your reply, am on the process.
I have attached a picture of the tray.
Thank you.
Esther
Thank you for your reply, am on the process.
I have attached a picture of the tray.
Thank you.
Esther
Automated Translation 13 Mar 2020 7:07 pm
13 Mar 2020 1:26 pm: Edwin
Hello, Esther,
Thanks for the pictures. The tablet only needs a floor and below the floor the two rails come.
Best regards
Edwin
Hello, Esther,
Thanks for the pictures. The tablet only needs a floor and below the floor the two rails come.
Best regards
Edwin
Esther Oriku 17 Mar 2020 7:56 am
Hallo Edwin,
Thank you for your reply. I have attached the picture of the tray. Next is the rails.
Thank you
Esther
Thank you for your reply. I have attached the picture of the tray. Next is the rails.
Thank you
Esther
Automated Translation 17 Mar 2020 3:06 pm
17 Mar 2020 10:53 am: Edwin
Hello, Esther,
looks perfect. Just the rails and you're done.
Best regards
Edwin
Hello, Esther,
looks perfect. Just the rails and you're done.
Best regards
Edwin
Esther Oriku 20 Mar 2020 9:05 am
Hallo Edwin.
Thank you for your reply. Am almost finishing I have made the rails kindly sketch how am putting them on the bottom. I have attached the pictures.
Thank you
Esther
Thank you for your reply. Am almost finishing I have made the rails kindly sketch how am putting them on the bottom. I have attached the pictures.
Thank you
Esther
Automated Translation 20 Mar 2020 10:54 am
20 Mar 2020 9:41 am: Edwin
Hello, Esther,
Thank you, it looks very good and can be shipped.
Kind regards
Edwin
Hello, Esther,
Thank you, it looks very good and can be shipped.
Kind regards
Edwin
Esther Oriku 26 Mar 2020 9:13 am
Hallo Edwin.
Thank you for your reply The cutlery tray is finished ready for shipment.
Thank you.
Esther
Thank you for your reply The cutlery tray is finished ready for shipment.
Thank you.
Esther
Automated Translation 27 Mar 2020 9:28 am
26 Mar 2020 5:12 pm: Edwin
Hello, Esther,
then I look forward to the delivery.
Best regards
Edwin
Hello, Esther,
then I look forward to the delivery.
Best regards
Edwin
Prisca Noela Waiganjo 01 Jul 2020 3:08 pm
Hallo Edwin. My name is Noel I'm currently handling the quality check of the tray. Esther has missed a few mm while making the tray. It's current length is 54.7cm instead of 55cm. Does this make a big difference? Kindly let us know just to be accurate.
Automated Translation 02 Jul 2020 6:34 pm
01 Jul 2020 10:04 pm: Edwin
Hello, Noel,
that's no problem.
Best regards
Edwin
Hello, Noel,
that's no problem.
Best regards
Edwin
The final cutlery tray according to the following illustration:
Material: Mahogany
Reference: ON003318E-12886
Reference: ON003318E-12886
Costs to realize this cutlery tray according to the following illustration
| Price | |
|---|---|
| Cost of material |
19.46
|
| Cost of labour |
12.97
|
| Cost of packaging |
2.78
|
| Cost of delivery to local operations manager |
2.78
|
| Subtotal – payout to craftsman |
37.99
|
| Customer aquisition costs (advertising etc.) |
3.8
|
| Handling fee Urban Change Lab |
3.8
|
| Shipping costs from Kenya to Österreich* |
20
|
| VAT (Österreich)* |
12.46
|
| Total |
78.05
|
*Shipping costs and VAT vary depending on your location.
Leave a Reply