The idea from Andreas from München:
Made to measure cutlery tray,
Length: 46 cm
Width: 12,4 cm
Height: 5 cm
In each case in the middle lengthwise and crosswise a separation, so that 4 equal compartments arise.
Length: 46 cm
Width: 12,4 cm
Height: 5 cm
In each case in the middle lengthwise and crosswise a separation, so that 4 equal compartments arise.
The customer's rating:
Andreas 19 Dec 2021 1:18 pm
(Automatic translation) 19 Dec 2021 1:18 pm: Andreas
Very good!
Very good!
The story of the Made to measure cutlery tray, L: 46 cm W: 12,4 cm H: 5 cm:
Negotiation phase
Daniel Sibindi 02 Nov 2021 1:19 pm
Hello Andreas, my name is Daniel and I’d like to make your cutlery tray. The measurements are clear. Which type of wood would you like me to use? I can suggest to use Cyprus, Would you like me to apply any vanish? The thickness of the timber I'll use is 10mm so it's inner compartments size will be 3.5cm as you have given the outside measures (12.4cm)
Once I get this information I’ll make a quotation and begin the job as soon as possible.
Thank you
Once I get this information I’ll make a quotation and begin the job as soon as possible.
Thank you
Andreas 04 Nov 2021 11:27 pm
(Automatische Übersetzung) 04 Nov 2021 11:27 pm: Andreas
Hi Daniel,
Thx for your response!
I will go with your recommendation regarding the type of wood.
3,5 cm width should be fine too. And I like your idea of applying glaze.
The second cutlery box shall please have no inside walls.
I have attached images for further clarification.
Looking forward to your offer!
Kind regards
Andi
Hi Daniel,
Thx for your response!
I will go with your recommendation regarding the type of wood.
3,5 cm width should be fine too. And I like your idea of applying glaze.
The second cutlery box shall please have no inside walls.
I have attached images for further clarification.
Looking forward to your offer!
Kind regards
Andi
Daniel Sibindi 05 Nov 2021 6:44 am
Hi Andi.
Now I have the all idea.and if possible I can start the work
Now I have the all idea.and if possible I can start the work
Daniel Sibindi 05 Nov 2021 9:03 am
Hi Andi.
Now I have the all idea,and if possible I can start the work
Now I have the all idea,and if possible I can start the work
Production phase
Daniel Sibindi 15 Nov 2021 9:06 pm
Hello Andi.
I have made the cutlery try and the sizes are fine as you had given,if they're ok to your, you can tell the stain we can apply or you are ok with clear varnish
I have made the cutlery try and the sizes are fine as you had given,if they're ok to your, you can tell the stain we can apply or you are ok with clear varnish
Andreas 15 Nov 2021 11:04 pm
(Automatische Übersetzung) 15 Nov 2021 11:04 pm: Andreas
Hi Daniel,
looks great! Thank you so much for your support!
I will go with your proposal of clear varnish.
Kind regards
Andi
Hi Daniel,
looks great! Thank you so much for your support!
I will go with your proposal of clear varnish.
Kind regards
Andi
Daniel Sibindi 16 Nov 2021 5:08 am
Ok thank you
Daniel Sibindi 16 Nov 2021 12:54 pm
Hi andi.
The trays are done.
The trays are done.
Andreas 16 Nov 2021 2:08 pm
(Automatische Übersetzung) 16 Nov 2021 2:08 pm: Andreas
Great, I would say they can be shipped!
Thank you for the great work!
Great, I would say they can be shipped!
Thank you for the great work!
Daniel Sibindi 16 Nov 2021 4:54 pm
Thanks tu
Andreas 16 Nov 2021 8:42 pm
(Automatic translation) 16 Nov 2021 8:42 pm: Andreas
Thx.
Thx.
Prisca Noela Waiganjo 18 Nov 2021 8:25 am
Hello Andreas
My name is Noel, local operations manager, Nairobi. I’m currently doing the quality review of the two trays where I’ve noticed the following:
1. One of the trays has a width of 12.2cm instead of 12.4 cm
2. Some parts of the timber used had a dark stain as shown in the photos I’ve uploaded.
My name is Noel, local operations manager, Nairobi. I’m currently doing the quality review of the two trays where I’ve noticed the following:
1. One of the trays has a width of 12.2cm instead of 12.4 cm
2. Some parts of the timber used had a dark stain as shown in the photos I’ve uploaded.
Can we still ship the trays?
Regards
Noel
Andreas 18 Nov 2021 11:10 am
(Automatische Übersetzung) 18 Nov 2021 11:10 am: Andreas
Hi Noel,
Thx for your update.
All looks fine for me and the products may be sent out.
Kind regards
Andi
Hi Noel,
Thx for your update.
All looks fine for me and the products may be sent out.
Kind regards
Andi
Automated Translation 18 Nov 2021 11:14 am
18 Nov 2021 11:10 am: Andreas
Hi Noel,
Thx for your update.
All looks fine for me and the products may be sent out.
Kind regards
Andi
Hi Noel,
Thx for your update.
All looks fine for me and the products may be sent out.
Kind regards
Andi
The final Made to measure cutlery tray, L: 46 cm W: 12,4 cm H: 5 cm:
Material: Cyprus
Reference: ON005854E-31044
Reference: ON005854E-31044
Costs to realize this Made to measure cutlery tray, L: 46 cm W: 12,4 cm H: 5 cm
Price | |
---|---|
Cost of material |
23.96
|
Cost of labour |
23.96
|
Cost of packaging |
3.99
|
Cost of delivery to local operations manager |
1.6
|
Subtotal – payout to craftsman |
53.51
|
Customer aquisition costs (advertising etc.) |
5.35
|
Handling fee Urban Change Lab |
5.35
|
Shipping costs from Kenya to Germany* |
20
|
VAT (Germany)* |
12.2
|
Total |
100.21
|
*Shipping costs and VAT vary depending on your location.
Leave a Reply